Aspen 2007, Durango 2006-2007

Lower Control Arms

Print

Removal & Installation



  1. Raise and support the rear axle.
  2.  
  3. Remove the lower control arm bolt and flag nut at the axle.
  4.  
  5. Remove the lower control arm bolt and flag nut at the frame.
  6.  
  7. Remove the lower control arm from the vehicle.

    Click image to see an enlarged view

    Fig. Lower control arm details at rear axle



    Click image to see an enlarged view

    Fig. Lower control arm details at frame

  8.  

To install:

  1. Install the lower control arm to the vehicle.
  2.  
  3. Install the lower control arm bolt and flag nut at the frame.
  4.  
  5. Install the lower control arm bolt and flag nut at the axle.
  6.  
  7. Lower the vehicle to the ground and then tighten the bolts to 185 ft. lbs. (251 Nm).
  8.  

 
label.common.footer.alt.autozoneLogo