Aspen 2007, Durango 2006-2007

Upper Control Arms

Print

Removal & Installation



  1. Raise and support the rear axle.
  2.  
  3. Remove the upper control arm bolt and flag nut at the axle.
  4.  
  5. Remove the upper control arm bolt and flag nut at the frame side.
  6.  
  7. Remove the upper control arm from the vehicle.

    Click image to see an enlarged view

    Fig. Details of rear axle upper control arms

  8.  

To install:

  1. Install the upper control arm to the vehicle.
  2.  
  3. Install the upper control arm bolt and flag nut at the frame.
  4.  
  5. Install the upper control arm bolt and flag nut at the axle.
  6.  
  7. Lower the vehicle to the ground and then tighten the bolts to 115 ft. lbs. (156 Nm).
  8.  

 
label.common.footer.alt.autozoneLogo