Astro, Safari 1997-2005

Removal & Installation

Print

  1. Remove the instrument cluster trim plate.
  2.  
  3. Remove the retaining screw from the left edge of the control assembly.
  4.  
  5. Pivot the control assembly from the instrument panel.
  6.  
  7. Pull the control assembly out of the instrument panel in order to access the vacuum and the electrical connectors.

    Click image to see an enlarged view

    Fig. Control panel electrical connectors and vacuum connectors

  8.  
  9. Disconnect the following items from the control assembly:
    1. Electrical connectors
    2.  
    3. Vacuum connectors
    4.  

  10.  

To install:

  1. Connect the following items to the control assembly:
    1. Electrical connectors
    2.  
    3. Vacuum connectors
    4.  

  2.  
  3. Align the tab on the control assembly with the slot in the instrument panel.
  4.  
  5. Pivot the control assembly into the instrument panel.
  6.  
  7. Install the screw in order to retain the left edge of the control assembly.
    1. Tighten the screw in order to retain the left edge of the control assembly to 18 inch lbs. (2  Nm).
    2.  

  8.  
  9. Install the instrument cluster trim plate.
  10.  

 
label.common.footer.alt.autozoneLogo