Audi Cars 1999-05

1.8L L4 VIN B Std 7

Print

Trouble Code: P1612



Electronic Control Module Incorrect Coding

Possible Causes:



(If ECM was replaced) ECM ID not the same as the replaced unit
 
ECM has failed
 
Voltage supply for Engine Control Module (ECM) has shorted
 

Trouble Code: P1624



MIL Requested Signature Active

Possible Causes:



(If ECM was replaced) ECM ID not the same as the replaced unit
 
ECM has failed
 
Voltage supply for Engine Control Module (ECM) has shorted
 

Trouble Code: P1626



Data BUS Powertrain Missing Message From Transmission Control

Possible Causes:



(If ECM was replaced) ECM ID not the same as the replaced unit
 
ECM has failed
 
Voltage supply for Engine Control Module (ECM) has shorted
 

Trouble Code: P1630



Acceleration Pedal Position Sensor 1 Signal Too Low

Possible Causes:



Ground between engine and chassis may be broken
 
Throttle position sensor may have failed
 
Accelerator Pedal Position Sensor 2 has failed
 
Throttle position sensor wiring may have shorted
 
Faulty voltage supply
 
ECM has failed
 

Trouble Code: P1631



Acceleration Pedal Position Sensor 1 Signal Too High

Possible Causes:



Ground between engine and chassis may be broken
 
Throttle position sensor may have failed
 
Accelerator Pedal Position Sensor 2 has failed
 
Throttle position sensor wiring may have shorted
 
Faulty voltage supply
 
ECM has failed
 

Trouble Code: P1633



Acceleration Pedal Position Sensor 2 Signal Too Low

Possible Causes:



Ground between engine and chassis may be broken
 
Throttle position sensor may have failed
 
Accelerator Pedal Position Sensor 2 has failed
 
Throttle position sensor wiring may have shorted
 
Faulty voltage supply
 
ECM has failed
 

Trouble Code: P1634



Acceleration Pedal Position Sensor 2 Signal Too High

Possible Causes:



Ground between engine and chassis may be broken
 
Throttle position sensor may have failed
 
Accelerator Pedal Position Sensor 2 has failed
 
Throttle position sensor wiring may have shorted
 
Faulty voltage supply
 
ECM has failed
 

Trouble Code: P1639



Accelerator Pedal Position Sensor 1+2 Range/Performance

Possible Causes:



Ground between engine and chassis may be broken
 
Throttle position sensor may have failed
 
Accelerator Pedal Position Sensor 2 has failed
 
Throttle position sensor wiring may have shorted
 
Faulty voltage supply
 
ECM has failed
 

Trouble Code: P1640



Internal Control Module (EEPROM) Error

Possible Causes:



Engine Control Module (ECM) has failed
 
Voltage supply for Engine Control Module (ECM) has shorted
 

Trouble Code: P1648



Data Bus Powertrain Malfunction

Possible Causes:



Ground between engine and chassis may be broken
 
Throttle position sensor may have failed
 
Accelerator Pedal Position Sensor 2 has failed
 
Throttle position sensor wiring may have shorted
 
Faulty voltage supply
 
ECM has failed
 

Trouble Code: P1649



Data Bus Powertrain Missing Message from ABS Control Module

Possible Causes:



Ground between engine and chassis may be broken
 
Throttle position sensor may have failed
 
Accelerator Pedal Position Sensor 2 has failed
 
Throttle position sensor wiring may have shorted
 
Faulty voltage supply
 
Check the Terminal resistance for CAN-bus
 
Data-Bus wires have short
 
Data-Bus components are malfunctioning
 
ECM has failed
 

Trouble Code: P1654



Please Check DTC Memory of the Control Panel ECU

Possible Causes:



Ground between engine and chassis may be broken
 
Faulty voltage supply
 
ECM has failed
 

Trouble Code: P1676



Drive by Wire-MIL Circuit Electrical Malfunction

Possible Causes:



Circuit from the MIL to the ECM
 
ECM has failed
 
Circuit from the EPC to the ECM
 

Trouble Code: P1677



Drive by Wire-MIL Circuit Short to B+

Possible Causes:



Circuit from the MIL to the ECM
 
ECM has failed
 
Circuit from the EPC to the ECM
 

Trouble Code: P1681



Control Unit Programming, Programming Not Finished

Possible Causes:



ECM has failed
 

Trouble Code: P1690



Malfunction Indication Light Malfunction

Possible Causes:



Wire from ECM to MIL is shorted or grounded
 
ECM has failed
 
MIL has failed
 

Trouble Code: P1691



Malfunction Indication Light Open

Possible Causes:



Wire from ECM to MIL is shorted or grounded
 
ECM has failed
 
MIL has failed
 

Trouble Code: P1692



Malfunction Indication Light Short to Ground

Possible Causes:



Wire from ECM to MIL is shorted or grounded
 
ECM has failed
 
MIL has failed
 

Trouble Code: P1693



Malfunction Indication Light Short to B+

Possible Causes:



Wire from ECM to MIL is shorted or grounded
 
ECM has failed
 
MIL has failed
 

Trouble Code: P2096



Post Catalyst Fuel Trim System Too Lean (Bank 1)

Possible Causes:



Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor (behind catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
Check circuits for shorts to each other, ground or power
 
ECM has failed
 

Trouble Code: P2097



Post Catalyst Fuel Trim System Too Rich (Bank 1)

Possible Causes:



Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor (behind catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
Check circuits for shorts to each other, ground or power
 
ECM has failed
 

Trouble Code: P2098



Post Catalyst Fuel Trim System Too Lean (Bank 2)

Possible Causes:



Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor (behind catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
Check circuits for shorts to each other, ground or power
 
ECM has failed
 

Trouble Code: P2099



Post Catalyst Fuel Trim System Too Rich (Bank 2)

Possible Causes:



Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor (behind catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
Check circuits for shorts to each other, ground or power
 
ECM has failed
 

Trouble Code: P2101



Throttle Actuator Control Motor Range/Performance

Possible Causes:



TACM wiring harness connector is damaged or open
 
TACM wiring may be crossed in the wire harness assembly
 
TACM (motor) circuit is open, or TACM assembly is damaged (possible open circuit)
 
TACM or the Throttle Valve is dirty
 
Throttle Position sensor has failed
 
ECM has failed
 

Trouble Code: P2400



EVAP Leak Detection Pump (LDP) Control Circuit Open

Possible Causes:



EVAP LDP power supply circuit is open
 
EVAP LDP solenoid valve is damaged or it has failed
 
EVAP LDP canister has a leak or a poor seal
 
ECM has failed
 
EVAP canister system has an improper seal
 
Evaporative Emission (EVAP) canister purge regulator valve 1 has failed
 
Leak Detection Pump (LDP) is faulty
 
Aftermarket EVAP parts that do not conform to specifications
 
EVAP component seals leaking (i.e., leaks in the Purge valve, fuel tank pressure sensor, canister vent solenoid, fuel vapor control valve tube assembly or fuel vapor vent valve).
 

Trouble Code: P2401



EVAP Leak Detection Pump Control Circuit Low

Possible Causes:



EVAP LDP power supply circuit is open
 
EVAP LDP solenoid valve is damaged or it has failed
 
EVAP LDP canister has a leak or a poor seal
 
ECM has failed
 
EVAP canister system has an improper seal
 
Evaporative Emission (EVAP) canister purge regulator valve 1 has failed
 
Leak Detection Pump (LDP) is faulty
 
Aftermarket EVAP parts that do not conform to specifications
 
EVAP component seals leaking (i.e., leaks in the Purge valve, fuel tank pressure sensor, canister vent solenoid, fuel vapor control valve tube assembly or fuel vapor vent valve).
 

Trouble Code: P2402



EVAP Leak Detection Pump Control Circuit High

Possible Causes:



EVAP LDP power supply circuit is open
 
EVAP LDP solenoid valve is damaged or it has failed
 
EVAP LDP canister has a leak or a poor seal
 
ECM has failed
 
EVAP canister system has an improper seal
 
Evaporative Emission (EVAP) canister purge regulator valve 1 has failed
 
Leak Detection Pump (LDP) is faulty
 
Aftermarket EVAP parts that do not conform to specifications
 
EVAP component seals leaking (i.e., leaks in the Purge valve, fuel tank pressure sensor, canister vent solenoid, fuel vapor control valve tube assembly or fuel vapor vent valve).
 

Trouble Code: P2403



EVAP Leak Detection Pump Sense Circuit Open

Possible Causes:



EVAP LDP power supply circuit is open
 
EVAP LDP solenoid valve is damaged or it has failed
 
EVAP LDP canister has a leak or a poor seal
 
ECM has failed
 
EVAP canister system has an improper seal
 
Evaporative Emission (EVAP) canister purge regulator valve 1 has failed
 
Leak Detection Pump (LDP) is faulty
 
Aftermarket EVAP parts that do not conform to specifications
 
EVAP component seals leaking (i.e., leaks in the Purge valve, fuel tank pressure sensor, canister vent solenoid, fuel vapor control valve tube assembly or fuel vapor vent valve).
 

Trouble Code: P2404



EVAP Leak Detection Pump Sense Circuit Range/Performance

Possible Causes:



EVAP LDP power supply circuit is open
 
EVAP LDP solenoid valve is damaged or it has failed
 
EVAP LDP canister has a leak or a poor seal
 
ECM has failed
 
EVAP canister system has an improper seal
 
Evaporative Emission (EVAP) canister purge regulator valve 1 has failed
 
Leak Detection Pump (LDP) is faulty
 
Aftermarket EVAP parts that do not conform to specifications
 
EVAP component seals leaking (i.e., leaks in the Purge valve, fuel tank pressure sensor, canister vent solenoid, fuel vapor control valve tube assembly or fuel vapor vent valve).
 

 
label.common.footer.alt.autozoneLogo