Audi Cars 1999-05

3.0L V6 VIN T Auto 3

Print

Trouble Code: P0270



Cylinder 4 Injector Circuit Low Input/Short to Ground

Possible Causes:



Injector control circuit is open
 
Injector power circuit (B+) is open
 
Injector control circuit is shorted to chassis ground
 
Injector is damaged or has failed
 
ECM is not connected or has failed
 
Fuel pump relay has failed
 
Fuel injectors may have malfunctioned
 
Faulty engine speed sensor
 

Trouble Code: P0271



Cylinder 4 Injector Circuit Low Input/Short to B+

Possible Causes:



Injector control circuit is open
 
Injector power circuit (B+) is open
 
Injector control circuit is shorted to chassis ground
 
Injector is damaged or has failed
 
ECM is not connected or has failed
 
Fuel pump relay has failed
 
Fuel injectors may have malfunctioned
 
Faulty engine speed sensor
 

Trouble Code: P0274



Cylinder 5 Injector Circuit Low Input/Short to Ground

Possible Causes:



Injector control circuit is open
 
Injector power circuit (B+) is open
 
Injector control circuit is shorted to chassis ground
 
Injector is damaged or has failed
 
ECM is not connected or has failed
 
Fuel pump relay has failed
 
Fuel injectors may have malfunctioned
 
Faulty engine speed sensor
 

Trouble Code: P0276



Cylinder 6 Injector Circuit Low Input/Short to Ground

Possible Causes:



Injector control circuit is open
 
Injector power circuit (B+) is open
 
Injector control circuit is shorted to chassis ground
 
Injector is damaged or has failed
 
ECM is not connected or has failed
 
Fuel pump relay has failed
 
Fuel injectors may have malfunctioned
 
Faulty engine speed sensor
 

Trouble Code: P0277



Cylinder 6 Injector Circuit Low Input/Short to B+

Possible Causes:



Injector control circuit is open
 
Injector power circuit (B+) is open
 
Injector control circuit is shorted to chassis ground
 
Injector is damaged or has failed
 
ECM is not connected or has failed
 
Fuel pump relay has failed
 
Fuel injectors may have malfunctioned
 
Faulty engine speed sensor
 

Trouble Code: P0300



Random/Multiple Misfire Detected

Possible Causes:



Base engine mechanical fault that affects two or more cylinders
 
Fuel metering fault that affects two or more cylinders
 
Fuel pressure too low or too high, fuel supply contaminated
 
EVAP system problem or the EVAP canister is fuel saturated
 
EGR valve is stuck open or the PCV system has a vacuum leak
 
Ignition system fault (coil, plugs) affecting two or more cylinders
 
MAF sensor contamination (it can cause a very lean condition)
 
Vehicle driven while very low on fuel (less than 1/8 of a tank)
 

Trouble Code: P0301



Cylinder Number 1 Misfire Detected

Possible Causes:



Air leak in the intake manifold, or in the EGR or ECM system
 
Base engine mechanical problem
 
Fuel delivery component problem (i.e., a contaminated, dirty or sticking fuel injector)
 
Fuel pump relay defective
 
Ignition coil fuses have failed
 
Ignition system problem (dirty damaged coil or plug)
 
Engine speed (RPM) sensor has failed
 
Camshaft position sensors have failed
 
Ignition coil is faulty
 
Spark plugs are not working properly or are not gapped properly
 

Trouble Code: P0302



Cylinder Number 2 Misfire Detected

Possible Causes:



Air leak in the intake manifold, or in the EGR or ECM system
 
Base engine mechanical problem
 
Fuel delivery component problem (i.e., a contaminated, dirty or sticking fuel injector)
 
Fuel pump relay defective
 
Ignition coil fuses have failed
 
Ignition system problem (dirty damaged coil or plug)
 
Engine speed (RPM) sensor has failed
 
Camshaft position sensors have failed
 
Ignition coil is faulty
 
Spark plugs are not working properly or are not gapped properly
 

Trouble Code: P0303



Cylinder Number 3 Misfire Detected

Possible Causes:



Air leak in the intake manifold, or in the EGR or ECM system
 
Base engine mechanical problem
 
Fuel delivery component problem (i.e., a contaminated, dirty or sticking fuel injector)
 
Fuel pump relay defective
 
Ignition coil fuses have failed
 
Ignition system problem (dirty damaged coil or plug)
 
Engine speed (RPM) sensor has failed
 
Camshaft position sensors have failed
 
Ignition coil is faulty
 
Spark plugs are not working properly or are not gapped properly
 

Trouble Code: P0304



Cylinder Number 4 Misfire Detected

Possible Causes:



Air leak in the intake manifold, or in the EGR or ECM system
 
Base engine mechanical problem
 
Fuel delivery component problem (i.e., a contaminated, dirty or sticking fuel injector)
 
Fuel pump relay defective
 
Ignition coil fuses have failed
 
Ignition system problem (dirty damaged coil or plug)
 
Engine speed (RPM) sensor has failed
 
Camshaft position sensors have failed
 
Ignition coil is faulty
 
Spark plugs are not working properly or are not gapped properly
 

Trouble Code: P0305



Cylinder Number 5 Misfire Detected

Possible Causes:



Air leak in the intake manifold, or in the EGR or ECM system
 
Base engine mechanical problem
 
Fuel delivery component problem (i.e., a contaminated, dirty or sticking fuel injector)
 
Fuel pump relay defective
 
Ignition coil fuses have failed
 
Ignition system problem (dirty damaged coil or plug)
 
Engine speed (RPM) sensor has failed
 
Camshaft position sensors have failed
 
Ignition coil is faulty
 
Spark plugs are not working properly or are not gapped properly
 

Trouble Code: P0306



Cylinder Number 6 Misfire Detected

Possible Causes:



Air leak in the intake manifold, or in the EGR or ECM system
 
Base engine mechanical problem
 
Fuel delivery component problem (i.e., a contaminated, dirty or sticking fuel injector)
 
Fuel pump relay defective
 
Ignition coil fuses have failed
 
Ignition system problem (dirty damaged coil or plug)
 
Engine speed (RPM) sensor has failed
 
Camshaft position sensors have failed
 
Ignition coil is faulty
 
Spark plugs are not working properly or are not gapped properly
 

Trouble Code: P0321



Ignition/Distributor Engine Speed Input Circuit Range/Performance

Possible Causes:



Engine speed sensor has failed or is damaged
 
ECM has failed
 
Sensor wheel is damaged or doesn-t fit properly
 
Sensor wheel spacer isn-t seated properly
 

Trouble Code: P0322



Ignition/Distributor Engine Input Circuit No Signal

Possible Causes:



Engine speed sensor has failed or is damaged
 
ECM has failed
 
Sensor wheel is damaged or doesn-t fit properly
 
Sensor wheel spacer isn-t seated properly
 

Trouble Code: P0340



Camshaft Position Sensor Circuit Malfunction

Possible Causes:



CMP sensor circuit is open or shorted to ground
 
CMP sensor circuit is shorted to power
 
CMP sensor ground (return) circuit is open
 
CMP sensor installation incorrect (Hall-effect type)
 
CMP sensor is damaged or CMP sensor shielding damaged
 
CMP sensor has failed
 
ECM has failed
 

Trouble Code: P0341



Camshaft Position Sensor Circ Range/Performance

Possible Causes:



CMP sensor circuit is open or shorted to ground
 
CMP sensor circuit is shorted to power
 
CMP sensor ground (return) circuit is open
 
CMP sensor installation incorrect (Hall-effect type)
 
CMP sensor is damaged or CMP sensor shielding damaged
 
ECM has failed
 

Trouble Code: P0342



Camshaft Position Sensor -A- Circuit (Bank 1 or Single Sensor) Low Input

Possible Causes:



CMP sensor circuit is open or shorted to ground
 
CMP sensor circuit is shorted to power
 
CMP sensor ground (return) circuit is open
 
CMP sensor installation incorrect (Hall-effect type)
 
CMP sensor is damaged or CMP sensor shielding damaged
 
ECM has failed
 

Trouble Code: P0343



Camshaft Position Sensor -A- Circuit (Bank 1 or Single Sensor) High Input

Possible Causes:



CMP sensor circuit is open or shorted to ground
 
CMP sensor circuit is shorted to power
 
CMP sensor ground (return) circuit is open
 
CMP sensor installation incorrect (Hall-effect type)
 
CMP sensor is damaged or CMP sensor shielding damaged
 
ECM has failed
 

Trouble Code: P0345



Camshaft Position Sensor -A- Circuit (Bank 2) Malfunction

Possible Causes:



CMP sensor circuit is open or shorted to ground
 
CMP sensor circuit is shorted to power
 
CMP sensor ground (return) circuit is open
 
CMP sensor installation incorrect (Hall-effect type)
 
CMP sensor is damaged or CMP sensor shielding damaged
 
ECM has failed
 

Trouble Code: P0346



Camshaft Position Sensor -A- Circuit (Bank 2) Range/Performance

Possible Causes:



CMP sensor circuit is open or shorted to ground
 
CMP sensor circuit is shorted to power
 
CMP sensor ground (return) circuit is open
 
CMP sensor installation incorrect (Hall-effect type)
 
CMP sensor is damaged or CMP sensor shielding damaged
 
ECM has failed
 

Trouble Code: P0347



Camshaft Position Sensor -A- Circuit (Bank 2) Low Input

Possible Causes:



CMP sensor circuit is open or shorted to ground
 
CMP sensor circuit is shorted to power
 
CMP sensor ground (return) circuit is open
 
CMP sensor installation incorrect (Hall-effect type)
 
CMP sensor is damaged or CMP sensor shielding damaged
 
ECM has failed
 

Trouble Code: P0348



Camshaft Position Sensor -A- Circuit -A- Circuit (Bank 2) High Input

Possible Causes:



CMP sensor circuit is open or shorted to ground
 
CMP sensor circuit is shorted to power
 
CMP sensor ground (return) circuit is open
 
CMP sensor installation incorrect (Hall-effect type)
 
CMP sensor is damaged or CMP sensor shielding damaged
 
ECM has failed
 

Trouble Code: P0351



Ignition Coilpack A Primary/Secondary Circuit Malfunction

Possible Causes:



Engine speed (RPM) sensor has failed
 
Camshaft Position (CMP) sensor has failed
 
Power Supply Relay is shorted to an open circuit
 
There is a malfunction in voltage supply
 
Ignition coilpack is damaged or it has failed
 
Cylinder 1 to 4 Fuel Injector(s) have failed
 
ECM has failed
 

Trouble Code: P0352



Ignition Coilpack B Primary/Secondary Circuit Malfunction

Possible Causes:



Engine speed (RPM) sensor has failed
 
Camshaft Position (CMP) sensor has failed
 
Power Supply Relay is shorted to an open circuit
 
There is a malfunction in voltage supply
 
Ignition coilpack is damaged or it has failed
 
Cylinder 1 to 4 Fuel Injector(s) have failed
 
ECM has failed
 

Trouble Code: P0353



Ignition Coilpack C Primary/Secondary Circuit Malfunction

Possible Causes:



Engine speed (RPM) sensor has failed
 
Camshaft Position (CMP) sensor has failed
 
Power Supply Relay is shorted to an open circuit
 
There is a malfunction in voltage supply
 
Ignition coilpack is damaged or it has failed
 
Cylinder 1 to 4 Fuel Injector(s) have failed
 
ECM has failed
 

Trouble Code: P0354



Ignition Coilpack D Primary/Secondary Circuit Malfunction

Possible Causes:



Engine speed (RPM) sensor has failed
 
Camshaft Position (CMP) sensor has failed
 
Power Supply Relay is shorted to an open circuit
 
There is a malfunction in voltage supply
 
Ignition coilpack is damaged or it has failed
 
Cylinder 1 to 4 Fuel Injector(s) have failed
 
ECM has failed
 

Trouble Code: P0355



Ignition Coilpack E Primary/Secondary Circuit Malfunction

Possible Causes:



Engine speed (RPM) sensor has failed
 
Camshaft Position (CMP) sensor has failed
 
Power Supply Relay is shorted to an open circuit
 
There is a malfunction in voltage supply
 
Ignition coilpack is damaged or it has failed
 
Cylinder 1 to 4 Fuel Injector(s) have failed
 
ECM has failed
 

Trouble Code: P0356



Ignition Coilpack F Primary/Secondary Circuit Malfunction

Possible Causes:



Engine speed (RPM) sensor has failed
 
Camshaft Position (CMP) sensor has failed
 
Power Supply Relay is shorted to an open circuit
 
There is a malfunction in voltage supply
 
Ignition coilpack is damaged or it has failed
 
Cylinder 1 to 4 Fuel Injector(s) have failed
 
ECM has failed
 

Trouble Code: P0366



Camshaft Position Sensor -B- Circuit (Bank 1) Range/Performance

Possible Causes:



CMP sensor circuit is open or shorted to ground
 
CMP sensor circuit is shorted to power
 
CMP sensor ground (return) circuit is open
 
CMP sensor installation incorrect (Hall-effect type)
 
CMP sensor is damaged or CMP sensor shielding damaged
 
ECM has failed
 

Trouble Code: P0367



Camshaft Position Sensor -B- Circuit (Bank 1) Low Input

Possible Causes:



CMP sensor circuit is open or shorted to ground
 
CMP sensor circuit is shorted to power
 
CMP sensor ground (return) circuit is open
 
CMP sensor installation incorrect (Hall-effect type)
 
CMP sensor is damaged or CMP sensor shielding damaged
 
ECM has failed
 

Trouble Code: P0368



Camshaft Position Sensor -B- Circuit (Bank 1) High Input

Possible Causes:



CMP sensor circuit is open or shorted to ground
 
CMP sensor circuit is shorted to power
 
CMP sensor ground (return) circuit is open
 
CMP sensor installation incorrect (Hall-effect type)
 
CMP sensor is damaged or CMP sensor shielding damaged
 
ECM has failed
 

Trouble Code: P0391



Camshaft Position Sensor -B- Circuit (Bank 2) Range/Performance

Possible Causes:



CMP sensor circuit is open or shorted to ground
 
CMP sensor circuit is shorted to power
 
CMP sensor ground (return) circuit is open
 
CMP sensor installation incorrect (Hall-effect type)
 
CMP sensor is damaged or CMP sensor shielding damaged
 
ECM has failed
 

Trouble Code: P0392



Camshaft Position Sensor -B- Circuit (Bank 2) Low Input

Possible Causes:



CMP sensor circuit is open or shorted to ground
 
CMP sensor circuit is shorted to power
 
CMP sensor ground (return) circuit is open
 
CMP sensor installation incorrect (Hall-effect type)
 
CMP sensor is damaged or CMP sensor shielding damaged
 
ECM has failed
 

Trouble Code: P0393



Camshaft Position Sensor -B- Circuit (Bank 2) High Input

Possible Causes:



CMP sensor circuit is open or shorted to ground
 
CMP sensor circuit is shorted to power
 
CMP sensor ground (return) circuit is open
 
CMP sensor installation incorrect (Hall-effect type)
 
CMP sensor is damaged or CMP sensor shielding damaged
 
ECM has failed
 

Trouble Code: P0421



Warm Up Catalyst System Efficiency (Bank 1) Below Threshold

Possible Causes:



Air leaks at the exhaust manifold or in the exhaust pipes
 
Catalytic converter is damaged, contaminated or it has failed
 
ECT/CHT sensor has lost its calibration (the signal is incorrect)
 
Engine cylinders misfiring, or the ignition timing is over retarded
 
Engine oil is contaminated
 
Front HO2S or rear HO2S is contaminated with fuel or moisture
 
Front HO2S and/or the rear HO2S is loose in the mounting hole
 
Front HO2S much older than the rear HO2S (HO2S-11 is lazy)
 
Fuel system pressure is too high (check the pressure regulator)
 
Rear HO2S wires improperly connected or the HO2S has failed
 

Trouble Code: P0431



Warm Up Catalyst System Efficiency (Bank 2) Below Threshold

Possible Causes:



Air leaks at the exhaust manifold or in the exhaust pipes
 
Catalytic converter is damaged, contaminated or it has failed
 
ECT/CHT sensor has lost its calibration (the signal is incorrect)
 
Engine cylinders misfiring, or the ignition timing is over retarded
 
Engine oil is contaminated
 
Front HO2S or rear HO2S is contaminated with fuel or moisture
 
Front HO2S and/or the rear HO2S is loose in the mounting hole
 
Front HO2S much older than the rear HO2S (HO2S-11 is lazy)
 
Fuel system pressure is too high (check the pressure regulator)
 
Rear HO2S wires improperly connected or the HO2S has failed
 

Trouble Code: P0441



EVAP Control System Incorrect Purge Flow

Possible Causes:



EVAP canister purge valve is damaged
 
EVAP canister has an improper seal
 
Vapor line between purge solenoid and intake manifold vacuum reservoir is damaged, or vapor line between EVAP canister purge solenoid and charcoal canister is damaged
 
Vapor line between charcoal canister and check valve, or vapor line between check valve and fuel vapor valves is damaged
 
ECM has failed
 

Trouble Code: P0442



EVAP Control System Small Leak Detected

Possible Causes:



Aftermarket EVAP parts that do not conform to specifications
 
CV solenoid remains partially open when commanded to close
 
EVAP component seals leaking (i.e., leaks in the Purge valve, fuel tank pressure sensor, canister vent solenoid, fuel vapor control valve tube assembly or fuel vapor vent valve).
 
Fuel filler cap damaged, cross-threaded or loosely installed
 
Loose fuel vapor hose/tube connections to EVAP components
 
Small holes or cuts in fuel vapor hoses or EVAP canister tubes
 

Trouble Code: P0444



Evaporative Emission System Purge Control Valve Circuit Open

Possible Causes:



EVAP power supply circuit is open
 
EVAP solenoid control circuit is open or shorted to ground
 
EVAP solenoid control circuit is shorted to power (B+)
 
EVAP solenoid valve is damaged or it has failed
 
EVAP canister has a leak or a poor seal
 
ECM has failed
 

Trouble Code: P0445



Evaporative Emission System Purge Control Valve Circuit Shorted

Possible Causes:



EVAP power supply circuit is open
 
EVAP solenoid control circuit is open or shorted to ground
 
EVAP solenoid control circuit is shorted to power (B+)
 
EVAP solenoid valve is damaged or it has failed
 
EVAP canister has a leak or a poor seal
 
ECM has failed
 

 
label.common.footer.alt.autozoneLogo