Audi Cars 1999-05

3.2L V6 - Auto 6

Print

Trouble Code: P2098



Post Catalyst Fuel Trim System Too Lean (Bank 2)

Possible Causes:



Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor (behind catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
Check circuits for shorts to each other, ground or power
 
ECM has failed
 

Trouble Code: P2099



Post Catalyst Fuel Trim System Too Rich (Bank 2)

Possible Causes:



Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor (behind catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
Check circuits for shorts to each other, ground or power
 
ECM has failed
 

Trouble Code: P2101



Throttle Actuator Control Motor Range/Performance

Possible Causes:



TACM wiring harness connector is damaged or open
 
TACM wiring may be crossed in the wire harness assembly
 
TACM (motor) circuit is open, or TACM assembly is damaged (possible open circuit)
 
TACM or the Throttle Valve is dirty
 
Throttle Position sensor has failed
 
ECM has failed
 

Trouble Code: P2106



Throttle Actuator Control System - Forced Limited Power Conditions

Possible Causes:



TACM wiring harness connector is damaged or open
 
TACM wiring may be crossed in the wire harness assembly
 
TACM (motor) circuit is open, or TACM assembly is damaged (possible open circuit)
 
TACM or the Throttle Valve is dirty
 
Throttle Position sensor has failed
 
ECM has failed
 

Trouble Code: P2122



Accelerator Pedal Position Sensor -D- Circuit Low Input

Possible Causes:



Ground between engine and chassis may be broken
 
Throttle position sensor may have failed
 
Accelerator Pedal Position Sensor has failed
 
Throttle position sensor wiring may have shorted
 
Throttle position sensor has failed
 
Faulty voltage supply
 
ECM has failed
 

Trouble Code: P2123



Accelerator Pedal Position Sensor -D- Circuit High Input

Possible Causes:



Ground between engine and chassis may be broken
 
Throttle position sensor may have failed
 
Accelerator Pedal Position Sensor has failed
 
Throttle position sensor wiring may have shorted
 
Throttle position sensor has failed
 
Faulty voltage supply
 
ECM has failed
 

Trouble Code: P2127



Accelerator Pedal Position Sensor -E- Circuit Low Input

Possible Causes:



Ground between engine and chassis may be broken
 
Throttle position sensor may have failed
 
Accelerator Pedal Position Sensor has failed
 
Throttle position sensor wiring may have shorted
 
Throttle position sensor has failed
 
Faulty voltage supply
 
ECM has failed
 

Trouble Code: P2128



Accelerator Pedal Position Sensor -E- Circuit High Input

Possible Causes:



Ground between engine and chassis may be broken
 
Throttle position sensor may have failed
 
Accelerator Pedal Position Sensor has failed
 
Throttle position sensor wiring may have shorted
 
Throttle position sensor has failed
 
Faulty voltage supply
 
ECM has failed
 

Trouble Code: P2138



Throttle Position Sensor D/E Voltage Correlation

Possible Causes:



ETC TP sensor connector is damaged or shorted
 
ETC TP sensor circuits shorted together in the wire harness
 
ETC TP sensor signal circuit is shorted to VREF (5v)
 
ETC TP sensor is damaged or the ECM has failed
 

Trouble Code: P2181



Cooling System Performance Malfunction

Possible Causes:



ECT sensor has failed
 
ECT Sensor (on Radiator) has failed
 
ECT sensor signal circuit is open (inspect wiring & connector)
 
ECT sensor signal circuit is shorted
 
Cooling system malfunction, or the thermostat is stuck
 
Engine not operating at normal operating temperature
 
EOT sensor is damaged or it has failed
 

Trouble Code: P2195



O2 Sensor Signal Stuck Lean Bank 1 Sensor 1

Possible Causes:



Engine oil level high
 
Camshaft timing error
 
Cylinder compression low
 
Exhaust leaks in front of O2S
 
EGR valve is stuck open
 
EGR gasket is leaking
 
EVR diaphragm is leaking
 
Damaged fuel pressure regulator or extremely low fuel pressure
 
O2S circuit is open or shorted in the wiring harness
 
Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor (behind catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
Air leaks after the MAF sensor
 
PCV system leaks
 
Dip stick not seated properly
 

Trouble Code: P2196



O2 Sensor Signal Stuck Rich Bank 1 Sensor 1

Possible Causes:



Engine oil level high
 
Camshaft timing error
 
Cylinder compression low
 
Exhaust leaks in front of O2S
 
EGR valve is stuck open
 
EGR gasket is leaking
 
EVR diaphragm is leaking
 
Damaged fuel pressure regulator or extremely low fuel pressure
 
O2S circuit is open or shorted in the wiring harness
 
Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor (behind catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
Air leaks after the MAF sensor
 
PCV system leaks
 
Dip stick not seated properly
 

Trouble Code: P2231



O2 Sensor Signal Circuit Shorted to Heater Circuit Bank 1 Sensor 1

Possible Causes:



Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
O2S circuit is open or shorted in the wiring harness
 
ECM has failed
 

Trouble Code: P2234



O2 Sensor Signal Circuit Shorted to Heater Circuit Bank 2 Sensor 1

Possible Causes:



Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
O2S circuit is open or shorted in the wiring harness
 
ECM has failed
 

Trouble Code: P2237



O2 Sensor Positive Current Control Circuit/Open Bank 1 Sensor 1

Possible Causes:



Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
O2S circuit is open or shorted in the wiring harness
 
ECM has failed
 

Trouble Code: P2240



O2 Sensor Positive Current Control Circuit/Open Bank 2 Sensor 1

Possible Causes:



Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
O2S circuit is open or shorted in the wiring harness
 
ECM has failed
 

Trouble Code: P2243



O2 Sensor Reference Voltage Circuit/Open Bank 1 Sensor 1

Possible Causes:



Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
O2S circuit is open or shorted in the wiring harness
 
ECM has failed
 

Trouble Code: P2247



O2 Sensor Reference Voltage Circuit/Open Bank 2 Sensor 1

Possible Causes:



Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
O2S circuit is open or shorted in the wiring harness
 
ECM has failed
 

Trouble Code: P2251



O2 Sensor Negative Voltage Circuit/Open Bank 1 Sensor 1

Possible Causes:



Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
O2S circuit is open or shorted in the wiring harness
 
ECM has failed
 

Trouble Code: P2254



O2 Sensor Negative Voltage Circuit/Open Bank 2 Sensor 1

Possible Causes:



Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
O2S circuit is open or shorted in the wiring harness
 
ECM has failed
 

Trouble Code: P2270



O2 Sensor Signal Stuck Lean Bank 1 Sensor 2

Possible Causes:



Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
O2S circuit is open or shorted in the wiring harness
 
ECM has failed
 

Trouble Code: P2271



O2 Sensor Signal Stuck Rich Bank 1 Sensor 2

Possible Causes:



Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
O2S circuit is open or shorted in the wiring harness
 
ECM has failed
 

Trouble Code: P2272



O2 Sensor Signal Stuck Lean Bank 2 Sensor 2

Possible Causes:



Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
O2S circuit is open or shorted in the wiring harness
 
ECM has failed
 

Trouble Code: P2273



O2 Sensor Signal Stuck Rich Bank 2 Sensor 2

Possible Causes:



Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
O2S circuit is open or shorted in the wiring harness
 
ECM has failed
 

Trouble Code: P2294



Fuel Pressure Regulator 2 Control Circuit

Possible Causes:



Fuel Pressure Regulator Valve has failed
 
Fuel Pressure Sensor has failed
 
Fuel Pump (FP) Control Module has failed
 
Fuel pump has failed
 
ECM has failed
 

Trouble Code: P2295



Fuel Pressure Regulator 2 Control Circuit Low

Possible Causes:



Fuel Pressure Regulator Valve has failed
 
Fuel Pressure Sensor has failed
 
Fuel Pump (FP) Control Module has failed
 
Fuel pump has failed
 
ECM has failed
 

Trouble Code: P2296



Fuel Pressure Regulator 2 Control Circuit High

Possible Causes:



Fuel Pressure Regulator Valve has failed
 
Fuel Pressure Sensor has failed
 
Fuel Pump (FP) Control Module has failed
 
Fuel pump has failed
 
ECM has failed
 

Trouble Code: P2414



O2 Sensor Exhaust Sample Error Bank 1 Sensor 1

Possible Causes:



Intake Manifold Runner Position Sensor is damaged or has failed
 
Intake system has leaks (false air)
 
Motor for intake flap is faulty
 
ECM has failed
 
Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
O2S circuit is open or shorted in the wiring harness
 

Trouble Code: P2422



Evaporative Emission System Vent Valve Stuck Closed

Possible Causes:



EVAP power supply circuit is open
 
EVAP solenoid control circuit is open or shorted to ground
 
EVAP solenoid control circuit is shorted to power (B+)
 
EVAP solenoid valve is damaged or it has failed
 
EVAP canister purge solenoid valve is faulty
 
ECM has failed
 

Trouble Code: P2539



Low Pressure Fuel System Sensor Circuit

Possible Causes:



Fuel Pressure Regulator Valve has failed
 
Fuel Pressure Sensor has failed
 
Fuel Pump (FP) Control Module has failed
 
Fuel pump has failed
 
ECM has failed
 

Trouble Code: P2540



Low Pressure Fuel System Sensor Circuit Range/Performance

Possible Causes:



Fuel Pressure Regulator Valve has failed
 
Fuel Pressure Sensor has failed
 
Fuel Pump (FP) Control Module has failed
 
Fuel pump has failed
 
ECM has failed
 

Trouble Code: P2541



Low Pressure Fuel System Sensor Circuit Low

Possible Causes:



Fuel Pressure Regulator Valve has failed
 
Fuel Pressure Sensor has failed
 
Fuel Pump (FP) Control Module has failed
 
Fuel pump has failed
 
ECM has failed
 

Trouble Code: P2626



O2 Sensor Pumping Current Trim Circuit/Open Bank 1 Sensor 1

Possible Causes:



Check activation of Recirculation Pump Relay
 
Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor (behind catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 

Trouble Code: P2629



O2 Sensor Pumping Current Trim Circuit/Open Bank 2 Sensor 1

Possible Causes:



Check activation of Recirculation Pump Relay
 
Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor (behind catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 

Trouble Code: P2637



Torque Management Feedback Signal -A-

Possible Causes:



Engine Control Module (ECM) has failed
 
Voltage supply for Engine Control Module (ECM) is damaged
 
Engine Coolant Temperature (ECT) sensor has failed
 
Intake Air Temperature (IAT) sensor has failed
 
Intake Manifold Runner Position Sensor has failed
 
Intake system has leaks (false air)
 
Motor for intake flap has failed
 
Mass Air Flow (MAF) sensor has failed
 

Trouble Code: P2714



Pressure Control Solenoid -D- Performance or Stuck Off

Possible Causes:



ATF level is low
 
Circuit harness connector contacts are corroded or ingressed of water
 
Circuit wires have shorted to each other, to battery or ground
 
Automatic Transmission Hydraulic Pressure Sensor 1 has failed
 
Solenoid valves in valve body are faulty
 
Transmission Control Module (TCM) needs replacing
 
Transmission Input Speed (RPM) Sensor has failed
 
Transmission Output Speed (RPM) Sensor has failed
 

Trouble Code: P2715



Pressure Control Solenoid -D- Performance or Stuck On

Possible Causes:



ATF level is low
 
Circuit harness connector contacts are corroded or ingressed of water
 
Circuit wires have shorted to each other, to battery or ground
 
Automatic Transmission Hydraulic Pressure Sensor 1 has failed
 
Solenoid valves in valve body are faulty
 
Transmission Control Module (TCM) needs replacing
 
Transmission Input Speed (RPM) Sensor has failed
 
Transmission Output Speed (RPM) Sensor has failed
 

Trouble Code: P2716



Pressure Control Solenoid -D- Electrical Malfunction

Possible Causes:



ATF level is low
 
Circuit harness connector contacts are corroded or ingressed of water
 
Circuit wires have shorted to each other, to battery or ground
 
Automatic Transmission Hydraulic Pressure Sensor 1 has failed
 
Solenoid valves in valve body are faulty
 
Transmission Control Module (TCM) needs replacing
 
Transmission Input Speed (RPM) Sensor has failed
 
Transmission Output Speed (RPM) Sensor has failed
 

Trouble Code: P2723



Pressure Control Solenoid -E- Performance or Stuck Off

Possible Causes:



ATF level is low
 
Circuit harness connector contacts are corroded or ingressed of water
 
Circuit wires have shorted to each other, to battery or ground
 
Automatic Transmission Hydraulic Pressure Sensor 1 has failed
 
Solenoid valves in valve body are faulty
 
Transmission Control Module (TCM) needs replacing
 
Transmission Input Speed (RPM) Sensor has failed
 
Transmission Output Speed (RPM) Sensor has failed
 

Trouble Code: P2724



Pressure Control Solenoid -E- Performance or Stuck On

Possible Causes:



ATF level is low
 
Circuit harness connector contacts are corroded or ingressed of water
 
Circuit wires have shorted to each other, to battery or ground
 
Automatic Transmission Hydraulic Pressure Sensor 1 has failed
 
Solenoid valves in valve body are faulty
 
Transmission Control Module (TCM) needs replacing
 
Transmission Input Speed (RPM) Sensor has failed
 
Transmission Output Speed (RPM) Sensor has failed
 

 
label.common.footer.alt.autozoneLogo