Audi Cars 1999-05

Inside Rear View Mirror

Print

Removal & Installation





Click image to see an enlarged view

Fig. Pull the rearview mirror down at an angle (arrow) to release it from the retaining plate (retaining springs are in the base of the mirror).



Click image to see an enlarged view

Fig. Install the mirror at 60-90 degrees offset to the installation position and turn it in direction of the arrow until the retaining spring engages.

  1. Unclip the cable channel cover.
  2.  
  3. Remove the harness connector from the retainer and disconnect.
  4.  
  5. Pull the rearview mirror down at an angle to release it from the retaining plate (retaining springs in base of mirror).
  6.  

To install:


CAUTION
Do NOT use the cable channel to turn the mirror.

  1. Install the mirror at 60-90 degrees offset to the installation position and turn it until the retaining spring engages.
  2.  

 
label.common.footer.alt.autozoneLogo