Aura, Outlook 2007

Removal & Installation

Print

  1. Remove the Instrument Panel (I/P) center molding
  2.  
  3. Remove the control panel screw.
    NOTE
    The key should be in the OFF position when connecting the electrical connectors to ensure proper calibration.

  4.  
  5. Disconnect the heater and air conditioning control panel electrical connectors and remove the assembly.
  6.  

To install:

  1. Installation is the reverse of removal.
    NOTE
    Do not adjust any controls on the HVAC control assembly while the HVAC control assembly and actuators are calibrating. If interrupted improper HVAC performance will result.

  2.  

 
label.common.footer.alt.autozoneLogo