Aura, Outlook 2007

Oil Pressure Sensor

Print

Removal & Installation



2.4L Engine
  1. Remove the starter.
  2.  
  3. Disconnect the engine wiring harness electrical connector from the oil pressure sensor.
  4.  
  5. Remove the engine oil pressure sensor.
  6.  

To install:

  1. Install the engine oil pressure sensor and tighten to 16 ft. lbs. (22 Nm).
  2.  
  3. Connect the engine wiring harness electrical connector to the oil pressure sensor.
  4.  
  5. Install the starter.

    Click image to see an enlarged view

    Fig. Oil pressure sensor location-2.4L engine

  6.  

3.5L Engine
  1. Raise and support the vehicle.
  2.  
  3. Remove the oil pressure sensor heat shield bolts and shield.
  4.  
  5. Disconnect the engine wiring harness electrical connector) from the oil pressure sensor.
  6.  
  7. Remove the engine oil pressure sensor.
  8.  

To install:

  1. Install the engine oil pressure sensor and tighten to 12 ft. lbs. (16 Nm).
  2.  
  3. Connect the engine wiring harness electrical connector to the oil pressure sensor.

    Click image to see an enlarged view

    Fig. Connect the engine wiring harness electrical connector (1) to the oil pressure sensor-3.5L engine

  4.  
  5. Install the oil pressure sensor heat shield and bolts.
  6.  

3.6L Engine
  1. Disconnect the engine wiring harness electrical connector) from the oil pressure sensor.
  2.  
  3. Remove the engine oil pressure sensor.
  4.  

To install:

  1. Install the engine oil pressure sensor and tighten to 15 ft. lbs. (20 Nm).
  2.  
  3. Connect the engine wiring harness electrical connector to the oil pressure sensor.

    Click image to see an enlarged view

    Fig. Oil pressure sensor location-3.6L engine

  4.  

 
label.common.footer.alt.autozoneLogo