Aura, Outlook 2007

Oil Pump

Print

Removal & Installation



2.4L Engine
  1. Remove the accessory drive belt tensioner.
  2.  
  3. Remove the drive belt tensioner bracket.
  4.  
  5. Remove the engine front cover bolts.
  6.  
  7. Remove the long water pump bolt.
  8.  
  9. Remove the engine front cover and gaskets.
  10.  
  11. Remove the crankshaft front cover oil seal with an appropriate tool.
  12.  
  13. Remove the oil pump.
  14.  

To install:

  1. Install the oil pump.
  2.  
  3. Install the engine front cover with a new gasket.
  4.  
  5. Install the long water pump bolt and tighten to 18 ft. lbs. (25 Nm).
  6.  
  7. Install the engine front cover bolts and tighten to 18 ft. lbs. (25 Nm).
  8.  
  9. Install the drive belt tensioner bracket and tighten to 33 ft. lbs. (45 Nm).
  10.  
  11. Install the accessory drive belt tensioner and tighten to 33 ft. lbs. (45 Nm).
  12.  

3.5L Engine
  1. Remove the oil pan.
  2.  
  3. Remove the oil pump bolt.
  4.  
  5. Remove the oil pump and the oil pump drive shaft.
  6.  

To install:


NOTE
Rotate the oil pump drive shaft as necessary in order to obtain the engagement with the oil pump drive unit.

  1. Install the oil pump drive shaft and the oil pump.
  2.  
  3. Install the oil pump bolt and tighten to 30 ft. lbs. (41 Nm).
  4.  
  5. Install the oil pan
  6.  

3.6L Engine
  1. Remove the primary timing chain.
  2.  
  3. Remove the oil pump bolts and the oil pump.
  4.  

To install:

  1. Align the oil pump alternator with the crankshaft flats and install the oil pump to the engine block.
  2.  
  3. Align the pump body with the mounting holes in the cylinder block.
  4.  
  5. Install the oil pump bolts and tighten to 17 ft. lbs. (23 Nm).
  6.  
  7. Install the primary timing chain.
  8.  

 
label.common.footer.alt.autozoneLogo