Aura, Outlook 2007

Knuckles

Print

Removal & Installation



  1. Raise and support the vehicle.
  2.  
  3. Remove the wheel bearing/hub.
  4.  
  5. Separate the outer tie rod end from the knuckle.
  6.  
  7. Remove the nuts and bolts from the strut to the knuckle.
  8.  
  9. Separate the lower ball joint from the knuckle.
  10.  
  11. Remove the knuckle assembly.
  12.  

To install:

  1. Installation is the reverse of removal. Tighten the strut to knuckle nuts/bolts to 89 ft. lbs. (120 Nm) and the tie rod end to knuckle to 18 ft. lbs. (25 Nm) plus an additional 90 degrees.
  2.  

  1. Raise and support the vehicle.
  2.  
  3. Remove the wheel bearing/hub.
  4.  
  5. Separate the outer tie rod end from the knuckle.
  6.  
  7. Remove the nuts and bolts from the strut to the knuckle.
  8.  
  9. Separate the lower ball joint from the knuckle.
  10.  
  11. Remove the knuckle assembly.
  12.  

To install:

  1. Installation is the reverse of removal. Tighten the strut to knuckle nuts/bolts to 108 ft. lbs. (147 Nm) and the tie rod end to knuckle to 22 ft. lbs. (30 Nm) plus an additional 120 degrees.
  2.  

 
label.common.footer.alt.autozoneLogo