Aura, Outlook 2007

Removal & Installation

Print

  1. Remove the fuel pump.
  2.  
  3. Remove the fuel level sensor wiring harness from the clip on the pump.
  4.  
  5. Disconnect the fuel level sensor electrical connector from the pump electrical connector.
  6.  
  7. Push the tab on the sensor in towards the sensor and remove the level sensor from the module alignment feature.

    Click image to see an enlarged view

    Fig. Push the tab (1) on the sensor in towards the sensor and remove the level sensor from the module alignment feature (3)

  8.  

To install:

  1. Installation is the reverse of removal.
  2.  

 
label.common.footer.alt.autozoneLogo