Aura, Outlook 2007

Lower Control Arms

Print

Removal & Installation



  1. Raise and suitably support the vehicle.
  2.  
  3. Remove the rear tire and wheel assembly.
  4.  
  5. Remove the coil spring.
  6.  
  7. Remove the lower control arm bolts and nuts, then remove the arm.
  8.  

To install:

  1. Installation is the reverse of removal. Tighten the bolt/nut to 81 ft. lbs. (110 Nm).
  2.  
  3. Inspect the wheel alignment and adjust as needed.
  4.  



Click image to see an enlarged view

Fig. Rear lower control arm mounting-Outlook

  1. Remove the rear coil spring and related parts.
  2.  
  3. Rear lower control arm nut.
  4.  
  5. Rear lower control arm bolt.
  6.  
  7. Rear lower control arm.
  8.  

To install:

  1. Installation is the reverse of removal. Tighten the front bolt/nut to 81 ft. lbs. (110 Nm) plus an additional 45 degrees. Tighten the rear bolt/nut to 89 ft. lbs. (120 Nm) plus an additional 60 degrees.
  2.  
  3. Inspect the wheel alignment and adjust as needed.
  4.  

 
label.common.footer.alt.autozoneLogo