Aura, Outlook 2007

Trailing Arm

Print

Removal & Installation



  1. Raise and support the vehicle.
  2.  
  3. Remove the rear tire and wheel assembly.
  4.  
  5. Remove the 4 trailing arm bracket to body bolts.
  6.  
  7. Remove the rear parking brake cable from the trailing arm.
  8.  
  9. Remove the 3 trailing arm to knuckle through bolts.
  10.  
  11. Lower the trailing arm to gain access to the trailing arm to bracket bolt and nut.
  12.  
  13. Remove the trailing arm to bracket bolt and nut.
  14.  
  15. Separate the trailing arm from the bracket and remove the trailing arm from the vehicle.
  16.  

To install:

  1. Position the trailing arm to the bracket, install the bolt and nut. Tighten the trailing arm to bracket through bolt and nut to 44 ft. lbs. (60 Nm) plus an additional 60 degrees. Position the trailing arm to the vehicle.
  2.  
  3. Install the 3 trailing arm to knuckle bolts. Tighten to 133 ft. lbs. (180 Nm).
  4.  
  5. Install the rear parking brake cable on the trailing arm. Tighten to 89 in. lbs. (10 Nm).
  6.  
  7. Install the trailing arm bracket to body bolts. Tighten to 66 ft. lbs. (90 Nm) plus an additional 30 degrees and then a further 15 degrees.
  8.  
  9. Install the rear tire and wheel assembly.
  10.  
  11. Lower the vehicle.
  12.  

 
label.common.footer.alt.autozoneLogo