Aura, Outlook 2007

Removal & Installation

Print

  1. Disable the Supplemental Inflatable Restraint (SIR) system.
  2.  
  3. Insert a small blunt ended punch, or equivalent tool, through the access openings on the left and right of the steering wheel.
  4.  
  5. Push the spring fastener inward to release the air bag from the steering wheel.
  6.  
  7. Release the Connector Position Assurance (CPA) retainer.
  8.  
  9. Disconnect the electrical connectors.
  10.  
  11. Make an alignment mark to note the relationship between the steering wheel and the steering shaft. The marks will be needed to align the steering wheel during installation.
  12.  
  13. Remove the steering wheel nut and use a suitable 3-jawed puller to remove the steering wheel.
  14.  

To install:

  1. Install the steering wheel and tighten the nut to 24 ft. lbs. (32 Nm).
  2.  
  3. Connect the CPA and fasten the retainer.
  4.  
  5. Install the air bag.
  6.  
  7. Enable the SIR system.
  8.  

  1. Disable the Supplemental Inflatable Restraint (SIR) system.
  2.  
  3. Insert a small blunt ended punch, or equivalent tool, through the access openings on the left and right of the steering wheel.
  4.  
  5. Push the spring fastener inward to release the air bag from the steering wheel.
  6.  
  7. Release the Connector Position Assurance (CPA) retainer.
  8.  
  9. Disconnect the electrical connectors.
  10.  
  11. Make an alignment mark to note the relationship between the steering wheel and the steering shaft. The marks will be needed to align the steering wheel during installation.
  12.  
  13. Remove the steering wheel nut and use a suitable 3-jawed puller to remove the steering wheel.
  14.  

To install:

  1. Install the steering wheel and tighten the nut to 37 ft. lbs. (50 Nm).
  2.  
  3. Connect the CPA and fasten the retainer.
  4.  
  5. Install the air bag.
  6.  
  7. Enable the SIR system.
  8.  

 
label.common.footer.alt.autozoneLogo