Aura, Outlook 2007

Windshield Wiper Systems

Print

Removal & Installation



Wiper Motor
  1. Remove the wiper arm finish cap and nut, them remove the arm.
  2.  
  3. Remove the air inlet grille panel.
  4.  
  5. Remove the bolts attaching the wiper module to the plenum.
  6.  
  7. Carefully lift the wiper module out of the plenum.
  8.  
  9. Disconnect the electrical connector from the wiper motor.
  10.  
  11. Disconnect the clip retaining the electrical harness to the wiper module.
  12.  
  13. Remove the wiper module assembly from the vehicle.
  14.  

To install:

  1. Installation is the reverse of removal. Tighten motor nuts to 89 in. lbs. (10 Nm) and the arm nuts to 26 ft. lbs. (35 Nm).
  2.  

  1. Remove the wiper arm finish cap and nut, them remove the arm.
  2.  
  3. Remove the air inlet grille panel.
  4.  
  5. Remove the bolts attaching the wiper transmission to the plenum.
  6.  
  7. Carefully lift the wiper transmission out of the plenum.
  8.  
  9. Disconnect the electrical connector from the wiper motor.
  10.  
  11. Remove the wiper motor.
  12.  

To install:

  1. Installation is the reverse of removal. Tighten motor nuts to 75 in. lbs. (8 Nm). Tighten the transmission assembly to 16 ft. lbs. (22 Nm) and the arm nuts to 14 ft. lbs. (19 Nm).

    Click image to see an enlarged view

    Fig. Front wiper assembly-Outlook

  2.  

Wiper Switch
  1. Remove the steering column trim covers.
  2.  
  3. Release the windshield wiper switch from the stalk switch mount.
  4.  
  5. Disconnect the electrical connector from the windshield wiper switch.
  6.  
  7. Remove the windshield wiper switch.
  8.  

To install:

Installation is the reverse of removal.

 
label.common.footer.alt.autozoneLogo