Aurora 2001-2003

Arming The System

Print

  1. Remove the key from the ignition switch.
  2.  
  3. Connect the passenger rear side air bag yellow connector to the vehicle harness yellow connector.
  4.  
  5. Install the (CPA) to the passenger rear side air bag yellow connector.
  6.  
  7. Connect the driver rear side air bag yellow connector to the vehicle harness yellow connector.
  8.  
  9. Install the CPA to the driver rear side air bag yellow connector.
  10.  
  11. Install the rear seat back.
  12.  
  13. Connect the driver side (seat) air bag and pretensioner yellow connector to the vehicle harness yellow connector.
  14.  
  15. Install both CPA locks to the driver side (seat) air bag and pretensioner yellow connector located under the driver seat.
  16.  
  17. Connect the passenger side (seat) air bag and pretensioner yellow connector to the vehicle harness yellow connector.
  18.  
  19. Install both CPA locks to the passenger side (seat) air bag and pretensioner yellow connector located under the passenger seat.
  20.  
  21. Connect the passenger (IP) frontal air bag yellow connector to the vehicle harness yellow connector located above the passenger sound insulator.
  22.  
  23. Install the CPA to the passenger yellow connector.
  24.  
  25. Install the passenger sound insulator.
  26.  
  27. Connect the driver frontal air bag yellow connector to the vehicle harness yellow connector located next to steering column.
  28.  
  29. Install the CPA to the driver yellow connector.
  30.  
  31. Install the driver sound insulator.
  32.  
  33. Install the SIR fuse to the rear fuse block.
  34.  
  35. Install the rear seat.
  36.  
  37. Turn the ignition switch to the RUN position and verify that the AIR BAG warning lamp flashes 7 times, then turns OFF .
  38.  

 
label.common.footer.alt.autozoneLogo