Avalanche, Express, Savana 2006-2007

Blend Door Actuator

Print

Removal & Installation



  1. Remove the left rear quarter trim panel.
  2.  
  3. Disconnect the electrical connector from the actuator.
  4.  
  5. Remove the retaining screws from the actuator.
  6.  
  7. Remove the inner actuator from the vehicle.
  8.  
  9. Remove the outer actuator from the vehicle.

    Click image to see an enlarged view

    Fig. Blend door actuator and auxiliary heater case

  10.  

To install:

  1. Install the outer actuator to the vehicle.
  2.  
  3. Install the inner actuator to the vehicle.
  4.  
  5. Install the retaining screws to the actuator.
  6.  
  7. Connect the electrical connector to the actuator.
  8.  
  9. Install the left rear quarter trim panel.
  10.  

 
label.common.footer.alt.autozoneLogo