Avalanche, Express, Savana 2006-2007

Glow Plugs

Print

Removal & Installation



  1. Remove or disconnect the following:
    NOTE
    On vehicles with Federal emissions systems, there is a buss bar connecting the glow plugs on each bank of the engine.



    Negative battery cables
     
    Front tire
     
    Inner splash shield from the fender well
     
    Air cleaner outlet duct
     
    Electrical nuts from the glow plug(s)
     
    Harness from the glow plug(s)
     



    Glow plug(s)
     

  2.  

To install:

  1. Install or connect the following:

    Glow plug and tighten to 13 ft. lbs. (18 Nm)
     
    Buss bar and wiring
     
    Glow plug electrical nut and tighten to 13 inch lbs. (1.5 Nm)
     
    Air cleaner outlet duct
     
    Splash shield to the fender well
     
    Negative battery cables
     

  2.  

 
label.common.footer.alt.autozoneLogo