Avalanche, Express, Savana 2006-2007

Multi-Function (Combination) Switch

Print

Removal & Installataion




CAUTION
When performing service around the SIR system components or wiring, the SIR system MUST be disabled. Failure to do so could result in possible air bag deployment, personal injury or unneeded SIR system repairs.

  1. Make sure the switch is in the OFF position.
  2.  
  3. Remove the steering wheel.
  4.  
  5. Remove the steering column shroud.
  6.  
  7. Unfasten the screws from the switch and remove the switch. Detach the electrical connection.

    Click image to see an enlarged view

    Fig. Exploded view of the turn signal combination switch

  8.  

To install:

  1. Installation is the reverse of removal. Tighten the switch mounting screws to 27 inch lbs. (3 Nm).
  2.  
  3. Enable the SIR system.
  4.  

 
label.common.footer.alt.autozoneLogo