Avalanche, Express, Savana 2006-2007

Shock Absorbers

Print

Removal & Installation



  1. Raise and support the vehicle.
  2.  
  3. Remove or disconnect the following:

    Electrical connector, if equipped with selectable ride
     
    Upper shock absorber nut and bolt
     
    Lower shock absorber nut and bolt
     
    Shock absorber

    Click image to see an enlarged view

    Fig. Exploded view of the rear shock absorber mounting

     

  4.  

To install:

  1. Installation is the reverse of removal. Tighten the nuts to 70 ft. lbs. (95 Nm).
  2.  
  3. Connect the electrical connector if equipped with Selectable Ride. Remove the safety stands. Lower the vehicle.
  4.  

 
label.common.footer.alt.autozoneLogo