Avalon 1995-1996

Wheel Speed Sensors

Print

Removal & Installation



Front Wheel

Specific to:

Toyota Avalon 1995-1996

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove the fender liner.
  4.  
  5. Disconnect the speed sensor connector.
  6.  
  7. Remove the 3 clamp bolts holding the sensor harness to the body and shock absorber.
  8.  
  9. Remove the speed sensor from the steering knuckle.

    Click image to see an enlarged view

    Fig. Front wheel speed sensor

  10.  

To install:

  1. Installation is the reverse of removal, noting the following:
    1. Tighten the speed sensor mounting bolt to 69 inch lbs. (8 Nm).
    2.  
    3. Tighten the 3 sensor harness clamp bolts to 48 inch lbs. (5 Nm).
    4.  

  2.  

Rear Wheel

Specific to:

Toyota Avalon 1995-1996

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove the seat cushion and seat back.
  4.  
  5. Disconnect the speed sensor connector, and pull out the sensor wire harness with the grommet.
  6.  
  7. Remove the bolt and speed sensor from the axle carrier.
  8.  
  9. Remove the 2 clamp bolts holding the sensor wire harness to the body and shock absorber.

    Click image to see an enlarged view

    Fig. Rear wheel speed sensor

  10.  

To install:

  1. Installation is the reverse of removal, noting the following:
    1. Tighten the 2 sensor harness clamp bolts to 48 inch lbs. (5 Nm).
    2.  
    3. Tighten the speed sensor mounting bolt to 69 inch lbs. (8 Nm).
    4.  

  2.  

 
label.common.footer.alt.autozoneLogo