Avalon 1995-1996

Electronic Control Module

Print

Location



Specific to:

Toyota Avalon 1995-1996



Click image to see an enlarged view

Fig. Electronic Control Module (ECM) location

Operation



Specific to:

Toyota Avalon 1995-1996

The ECM controls all engine computer related functions.

Removal & Installation



Specific to:

Toyota Avalon 1995-1996


CAUTION
Before servicing components near or affected by the SRS (air bag) system, read and observe all SRS Service Precautions. Refer to Supplemental Restraint System (SRS), in the Chassis Electrical section. Failure to observe all precautions may result in accidental airbag deployment, personal injury, or death.

  1. Disconnect the negative battery cable and wait at least 3 minutes for the SRS memory to drain.
  2.  
  3. Remove any necessary trim panels to enable glove compartment removal, and remove the glove compartment. Refer to Instrument Panel Removal & Installation in the Body Interior section.
  4.  
  5. Remove the ECM mounting bolts.
  6.  
  7. Disconnect the ECM connector.
  8.  
  9. Remove the ECM.
  10.  

To install:

  1. Installation is the reverse of removal.
  2.  

 
label.common.footer.alt.autozoneLogo