Avalon 1995-1996

Removal & Installation

Print

  1. Before servicing the vehicle, refer to the Precautions Section.
    CAUTION
    Before servicing components near or affected by the SRS (air bag) system, read and observe all SRS Service Precautions. Refer to Supplemental Restraint System (SRS), in the Chassis Electrical section. Failure to observe all precautions may result in accidental airbag deployment, personal injury, or death.

  2.  
  3. Disconnect the negative battery cable and wait at least 3 minutes for the SRS memory to drain.
  4.  
  5. Remove the instrument lower finish panel. Refer to Instrument Panel Removal & Installation in the Body Interior section.
  6.  
  7. Disconnect the instrument center cluster panel.
  8.  
  9. Disconnect the water valve control cable.

    Click image to see an enlarged view

    Fig. Disconnect the water valve control cable

  10.  
  11. Disconnect the air mix damper control cable.

    Click image to see an enlarged view

    Fig. Disconnect the air mix damper control cable

  12.  

To install:

  1. Installation is the reverse of removal.
  2.  

 
label.common.footer.alt.autozoneLogo