Avalon 1995-1996

Removal & Installation

Print

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative battery cable.
  4.  
  5. Drain the engine coolant.
  6.  
  7. Remove the No. 1 cooling fan:
    1. Disconnect the cruise control actuator wire from the clamp on the fan shroud.

      Click image to see an enlarged view

      Fig. No. 1 cooling fan components

    2.  
    3. Disconnect the cooling fan connector.
    4.  
    5. Remove the 4 bolts and the No. 1 cooling fan.

      Click image to see an enlarged view

      Fig. No. 1 cooling fan removal

    6.  

  8.  
  9. Disconnect the upper radiator hose from the radiator.

    Click image to see an enlarged view

    Fig. No. 2 cooling fan components

  10.  
  11. Remove the No. 2 cooling fan:
    1. Disconnect the cooling fan connector.
    2.  
    3. Remove the 3 bolts and the No. 2 cooling fan.

      Click image to see an enlarged view

      Fig. No. 2 cooling fan removal

    4.  

  12.  

To install:

  1. Installation is the reverse of removal, noting the following:
    1. Tighten the cooling fan bolts to 44 inch lbs. (5 Nm).
    2.  
    3. Refill engine coolant.
    4.  
    5. Start the engine and check for leaks.
    6.  

  2.  

 
label.common.footer.alt.autozoneLogo