Avalon 1995-1996

Multi-Function (Combination) Switch

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
    CAUTION
    Before servicing components near or affected by the SRS (air bag) system, read and observe all SRS Service Precautions. Refer to Supplemental Restraint System (SRS), in the Chassis Electrical section. Failure to observe all precautions may result in accidental airbag deployment, personal injury, or death.

  2.  
  3. Disconnect the negative battery cable and wait at least 3 minutes for the SRS memory to drain.
  4.  
  5. Remove the upper and lower column covers.

    Click image to see an enlarged view

    Fig. Combination switch assembly

  6.  
  7. Remove the multi-function (wiper/washer) switch:
    1. Disconnect the connector.
    2.  
    3. Remove the screws.
    4.  
    5. Remove the switch.

      Click image to see an enlarged view

      Fig. Remove the multi-function (wiper/washer) switch

    6.  

  8.  

To install:

  1. Installation is the reverse of removal.
  2.  

 
label.common.footer.alt.autozoneLogo