Avalon 1995-1996

Panels & Trim

Print

Removal & Installation



Door Trim Panel
Front Door

Specific to:

Toyota Avalon 1995-1996

  1. Before servicing the vehicle, refer to the Precautions Section.
    NOTE
    Tape the tip of a screwdriver to use for removing components.



    Click image to see an enlarged view

    Fig. Front door components

  2.  
  3. Remove the inside handle bezel, courtesy light and power window switch.

    Click image to see an enlarged view

    Fig. Using a taped prytool, carefully remove the bezel portion of the handle



    Click image to see an enlarged view

    Fig. Remove the bezel by pulling towards the tip of the handle



    Click image to see an enlarged view

    Fig. Use a pry tool to . . .



    Click image to see an enlarged view

    Fig. . . . remove any screw covers . . .



    Click image to see an enlarged view

    Fig. . . . and extract any retaining screws from the door panel

  4.  
  5. Remove the door trim:
    1. Using a screwdriver, remove the 3 caps.
    2.  
    3. Remove the 7 screws and the clip.

      Click image to see an enlarged view

      Fig. Use a small pry tool to . . .



      Click image to see an enlarged view

      Fig. . . . remove the screw cap covers. . .



      Click image to see an enlarged view

      Fig. . . . from the door panel



      Click image to see an enlarged view

      Fig. This style door fastener must be pressed in with a scratch awl. . .



      Click image to see an enlarged view

      Fig. . . . to be released



      Click image to see an enlarged view

      Fig. Remove the front door trim caps, screws and clips

    4.  
    5. Insert a screwdriver between the door and door trim to pry the trim out.
    6.  
    7. Pull the trim upward to remove it, then disconnect the connector.

      Click image to see an enlarged view

      Fig. Carefully pry the edge of the door panel around the outer edges, then remove the door panel



      Click image to see an enlarged view

      Fig. Make sure to disconnect all wiring

    8.  

  6.  

To install:

  1. Installation is the reverse of removal.
  2.  

Rear Door

Specific to:

Toyota Avalon 1995-1996

  1. Before servicing the vehicle, refer to the Precautions Section.
    NOTE
    Tape the tip of a screwdriver to use for removing components.



    Click image to see an enlarged view

    Fig. Rear door components

  2.  
  3. Remove the inside handle bezel, ash tray and power window switch base.
  4.  
  5. Remove the door trim:
    1. Using a screwdriver, remove the 2 caps.
    2.  
    3. Remove the 4 screws and 2 clips.
    4.  
    5. Insert a screwdriver between the door and door trim to pry the trim out.
    6.  
    7. Pull the trim upward to remove it.

      Click image to see an enlarged view

      Fig. Remove the rear door trim caps, screws and clips

    8.  

  6.  

To install:

  1. Installation is the reverse of removal.
  2.  

 
label.common.footer.alt.autozoneLogo