Avalon 1995-1996

Removal & Installation

Print

  1. Before servicing the vehicle, refer to the Precautions Section.
    CAUTION
    Before servicing components near or affected by the SRS (air bag) system, read and observe all SRS Service Precautions. Refer to Supplemental Restraint System (SRS), in the Chassis Electrical section. Failure to observe all precautions may result in accidental airbag deployment, personal injury, or death.

  2.  
  3. Disconnect the negative battery cable and wait at least 3 minutes for the SRS memory to drain.
  4.  
  5. Remove the glove compartment parts.
  6.  
  7. Disconnect the air inlet servomotor connector.
  8.  
  9. Remove the 2 screws and the air inlet servomotor.

    Click image to see an enlarged view

    Fig. Remove the air inlet servomotor

  10.  

To install:

  1. Installation is the reverse of removal.
  2.  

 
label.common.footer.alt.autozoneLogo