Avenger 2008

Removal & Installation

Print

  1. Disconnect negative cable from battery terminal.
  2.  
  3. Disconnect radiator fan electrical connector.
  4.  
  5. Partially drain cooling system.
  6.  
  7. Remove upper radiator hose at radiator.
  8.  
  9. Remove fasteners and upper clip attaching fan assembly to radiator.
  10.  
  11. Remove radiator fan assembly by lifting upward.
  12.  

To install:

  1. Position radiator fan module in retaining clip.
  2.  
  3. Make sure clips are fully engaged.
  4.  
  5. Connect radiator fan electrical connector.
  6.  
  7. Install upper radiator hose at radiator.
  8.  
  9. Fill the cooling system.
  10.  

 
label.common.footer.alt.autozoneLogo