Avenger 2008

Oil Temperature Sensor

Print

Removal & Installation



2.4L Engine

Specific to:

Chrysler Sebring 2008-2009

Dodge Avenger 2008-2009

  1. Disconnect oil temperature sensor (1) electrical connector.
  2.  
  3. Remove sensor (1).

    Click image to see an enlarged view

    Fig. Remove sensor (1)

  4.  

To install:

  1. If re-using the oil temperature sensor, coat the threads with Mopar® thread sealant.
  2.  
  3. Install oil temperature sensor. Tighten to 160 inch lbs. (18 Nm).
  4.  
  5. Connect electrical connector.
  6.  

Specific to:

Chrysler Sebring 2008-2009

Dodge Avenger 2008-2009

  1. Disconnect oil temperature sensor electrical connector.
  2.  
  3. Remove sensor (1).

    Click image to see an enlarged view

    Fig. Remove sensor (1)

  4.  

To install:

  1. If re-using the oil temperature sensor, coat the threads with Mopar® thread sealant.
  2.  
  3. Install oil temperature sensor (1). Tighten to 160 inch lbs. (18 Nm).
  4.  
  5. Connect electrical connector.
  6.  

Testing



Refer to the appropriate Diagnostic Trouble Code (DTC) for testing and/or diagnosis procedures.

 
label.common.footer.alt.autozoneLogo