Avenger 2008

Serial Number Identification

Print

Engine



Specific to:

Chrysler Sebring 2008-2009

Dodge Avenger 2008-2009

The engine serial number (1) on the 2.4L engine is located on the rear of the cylinder block behind the oil pan. The serial number is visible with the oil pan in place. The serial number contains engine build date information.

Click image to see an enlarged view

Fig. Engine serial number location-2.4L engine

The engine identification number on the 2.7L engine is located on the rear of the cylinder block just below the left cylinder head.

Click image to see an enlarged view

Fig. Engine serial number location-2.7L engine

The engine identification number on the 3.5L engine is located on the rear of engine block just below the left cylinder head.

Click image to see an enlarged view

Fig. Engine serial number location-3.5L engine

Transaxle



Specific to:

Chrysler Sebring 2008-2009

Dodge Avenger 2008-2009

The 62TE transaxle is identified by a barcode label (1) that is fixed to the transaxle or the -PK- number (2).

Click image to see an enlarged view

Fig. 62TE transaxle identification barcode location

The 41TE transaxle is identified by a barcode label (1) that is fixed to the transaxle case.

Click image to see an enlarged view

Fig. 41TE transaxle is identified by a barcode label (1)

Vehicle Certification Label



Specific to:

Chrysler Sebring 2008-2009

Dodge Avenger 2008-2009



Click image to see an enlarged view

Fig. Vehicle Certification Label-Typical

A vehicle certification label is attached to every Chrysler LLC vehicle. The label certifies that the vehicle conforms to all applicable Federal Motor Vehicle Standards. The label also lists:



Month and year of vehicle manufacture.
 
Gross Vehicle Weight Rating (GVWR). The gross front and rear axle weight ratings (GAWR's) are based on a minimum rim size and maximum cold tire inflation pressure.
 
Vehicle Identification Number (VIN).
 
Type of vehicle.
 
Type of rear wheels.
 
Bar code.
 
Month, Day and Hour (MDH) of final assembly.
 
Paint and Trim codes.
 
Country of origin.
 

The label is located on the driver-side door shut-face.

Vehicle Identification Number



Specific to:

Chrysler Sebring 2008-2009

Dodge Avenger 2008-2009



Click image to see an enlarged view

Fig. Location of VIN plate

The Vehicle Identification Number (VIN) is located on the upper left corner of the instrument panel, near the left windshield pillar. The VIN consists of 17 characters in a combination of letters and numbers that provide specific information about the vehicle. Refer to VIN Code Breakdown table for decoding information. VIN CHECK DIGIT

To protect the consumer from theft and possible fraud the manufacturer is required to include a Check Digit at the ninth position of the Vehicle Identification Number. The check digit is used by the manufacturer and government agencies to verify the authenticity of the vehicle and official documentation. The formula to use the check digit is not released to the general public.

 
label.common.footer.alt.autozoneLogo