Avenger, Sebring Coupe, Stratus Coupe, 1999-2006

Slave (Actuator) Cylinder

Print

These vehicles use a clutch cable with a unique self-adjuster mechanism built into the cable which compensates for clutch disc wear. No bleeding is necessary or possible. The preload spring maintains tension on the cable. This tension keeps the clutch release bearing continuously loaded against the fingers of the clutch cover assembly. The cable requires no maintenance or lubrication.

Removal & Installation



  1. Drain the clutch fluid


  2.  
  3. Remove clutch master cylinder cap
  4.  
  5. Attach a hose to the slave cylinder bleed screw and insert the hose into a clean container
  6.  
  7. Loosen the bleed screw
  8.  
  9. Clutch tube connection using a flare wrench
  10.  
  11. Clutch tube
  12.  
  13. Clutch release cylinder from transaxle
  14.  

To install:

  1. Install the release cylinder to the transaxle and torque the bolts to 14 ft. lbs. (19 Nm)
  2.  
  3. Attach the clutch tube connection using a flare wrench
  4.  
  5. Refill the clutch fluid and bleed.
  6.  

 
label.common.footer.alt.autozoneLogo