Avenger, Sebring Coupe, Stratus Coupe, 1999-2006

Removal & Installation

Print

The radiator fan module includes a support shroud with two electrically driven motors with fan blades. The radiator fan module is fastened to the radiator. The motors, shroud, and fan blades are serviced separately.

  1. Remove the upper radiator crossmember.
  2.  
  3. Disconnect radiator fan electrical connector.
  4.  
  5. Remove the fasteners and upper clip attaching fan assembly to radiator.
  6.  
  7. Remove the radiator fan assembly by lifting upward.
  8.  

To install:

  1. Install the radiator fan to radiator. Install the retaining clip and tighten fasteners to 45 inch lbs. (5 Nm).
  2.  
  3. Connect radiator fan electrical connector.
  4.  
  5. Install the upper radiator crossmember.
  6.  

 
label.common.footer.alt.autozoneLogo