Avenger, Sebring Coupe, Stratus Coupe, 1999-2006

Ignition Switch & Lock Cylinder

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Disconnect battery negative cable from remote negative terminal on shock tower and properly isolate to prevent accidental reconnection.
  4.  
  5. Remove or disconnect the following:

    Steering column upper and lower covers
     
    Key ring antenna
     
    Steering lock cylinder
     

  6.  
  7. Insert the key in the steering lock cylinder and turn it to the "ACC" position.
  8.  
  9. Using a small Phillips head screwdriver, pull the steering lock cylinder toward you.
  10.  

To install:

  1. Install or connect the following:

    Ignition switch to steering column
     
    Steering lock cylinder to ignition switch
     
    Key ring antenna to ignition switch
     
    Steering column upper and lower covers
     

  2.  

 
label.common.footer.alt.autozoneLogo