Aveo 2004-2005

Accelerator Pedal Position Sensor

Print

Removal & Installation



  1. Disconnect the negative battery cable.
  2.  
  3. Disconnect the Electronic Throttle Control (ETC) connector from the accelerator pedal.
  4.  
  5. Remove the 3 accelerator pedal retaining nuts.
  6.  
  7. Remove the accelerator pedal assembly.
  8.  

To install:

  1. Position the accelerator pedal assembly into place and tighten the 2 retaining nuts to 14 ft. lbs. (19 Nm).
  2.  
  3. Connect the ETC connector to the accelerator pedal.
  4.  
  5. Connect the negative battery cable.
  6.  

 
label.common.footer.alt.autozoneLogo