Aveo 2004-2005

Throttle Position Sensor

Print

Removal & Installation



  1. Disconnect the negative battery cable.
  2.  
  3. Disconnect the Throttle Position (TP) sensor connector.
  4.  
  5. Remove the TP sensor retaining bolts and the TP sensor.
  6.  

To install:

  1. With the throttle valve closed, position the TP sensor on the throttle shaft. Align the TP sensor with the bolt holes.
  2.  
  3. Install the TP sensor retaining bolts and tighten to 18 inch lbs. (2 Nm).
  4.  
  5. Connect the TP sensor connector.
  6.  
  7. Connect the negative battery cable.
  8.  

 
label.common.footer.alt.autozoneLogo