Aveo 2004-2005

Ignition Switch & Lock Cylinder

Print

Removal & Installation



  1. Remove the lower steering column cover panel by removing the screws.
  2.  
  3. With the key in the ignition, turn to ACC and remove the lock cylinder. To remove the lock cylinder of the switch cylinder housing, press down the detent spring with a 2.5 Allen wrench, or other suitable tool, and pull out the lock cylinder.

    Click image to see an enlarged view

    Fig. To remove the lock cylinder of the switch cylinder housing, press down the detent spring with a 2.5 Allen wrench, or other suitable tool, and pull out the lock cylinder.

  4.  
  5. Remove the ignition switch retaining screw.
  6.  
  7. Disconnect the wiring and remove the ignition switch.
  8.  

To install:

  1. Install the ignition switch with the ignition switch retaining screw.
  2.  
  3. Tighten the ignition switch retaining screw to 18 inch lbs. (2 Nm).
  4.  
  5. Connect the wiring to the ignition switch.
  6.  
  7. Install the lock cylinder.
  8.  
  9. Install the lower steering column cover panel with the screws.
  10.  
  11. Tighten the lower steering column cover panel screws to 27 inch lbs. (3 Nm).
  12.  
  13. Connect the negative battery cable.
  14.  

 
label.common.footer.alt.autozoneLogo