Aveo 2004-2005

Ignition Switch

Print

Removal & Installation



  1. Disconnect negative battery cable.
  2.  
  3. Remove the lower steering column cover panel by removing the screws.
  4.  
  5. Remove the ignition switch retaining screw.
  6.  
  7. Remove the ignition switch and disconnect the ignition switch connector.

    Click image to see an enlarged view

    Fig. Remove the retaining screw (1) to remove the ignition switch (2).

  8.  

To install:

  1. Install the ignition switch using the retaining screw.
  2.  
  3. Connect the ignition connector.
  4.  
  5. Install the lower steering column cover panel.
  6.  
  7. Connector the negative battery cable.
  8.  

 
label.common.footer.alt.autozoneLogo