Aveo 2004-2005

Rear Window Wiper/Washer System

Print

Removal & Installation



Wiper Motor
  1. Disconnect the negative battery cable.
  2.  
  3. Remove the rear window wiper arm as follows:
    1. Open the wiper arm access cap.
    2.  
    3. Remove the nut and rear wiper arm.
    4.  

  4.  
  5. Remove the hatchback door lower garnish molding.
  6.  
  7. Remove the mounting bolts, then remove the rear wiper motor.
  8.  
  9. Disconnect the motor electrical connector.
  10.  

To install:

Click image to see an enlarged view

Fig. Rear wiper mounting mounting-Aveo



Click image to see an enlarged view

Fig. Rear wiper arm mounting-Aveo hatchback

  1. Connect the motor electrical connector.
  2.  
  3. Install the rear wiper motor and tighten the mounting bolts to 80 inch lbs. (9 Nm).
  4.  
  5. Install the hatchback door lower garnish molding.
  6.  
  7. Install the rear wiper arm as follows:
    1. Install the wiper arm and tighten the nut to 97 inch lbs. (11 Nm).
    2.  
    3. Close the wiper arm access cap.
    4.  

  8.  
  9. Connect the negative battery cable.
  10.  

 
label.common.footer.alt.autozoneLogo