Aveo 2006-2007

Removal & Installation

Print

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the instrument panel assembly. Refer to the following section for additional information, -Instrument Panel, Removal & Installation.-
  4.  
  5. Disconnect the electrical connector.
  6.  
  7. Remove the actuating rod by snapping it out of the lever with needle-nose pliers.
  8.  
  9. Remove the air temperature actuator retaining screws.
  10.  
  11. Remove the air temperature actuator.
  12.  

To install:

  1. Install the air temperature actuator.
  2.  
  3. Install the retaining screws and tighten.
  4.  
  5. Install the actuating rod.
  6.  
  7. Connect the electrical connector.
  8.  
  9. Install the instrument panel assembly.
  10.  
  11. Connect the negative battery cable.
  12.  

 
label.common.footer.alt.autozoneLogo