Aveo 2006-2007

Crankshaft Position Sensor

Print

Removal & Installation





Click image to see an enlarged view

Fig. Disconnect the crankshaft position sensor electrical connector.

  1. Disconnect the negative battery cable.
  2.  
  3. Disconnect the Crankshaft Position (CKP) sensor electrical connector.
  4.  
  5. Remove the CKP sensor bolt.
  6.  
  7. Remove the CKP sensor.
  8.  

To install:

  1. Install the CKP sensor and tighten the bolt to 58 inch lbs. (6.5 Nm).
  2.  
  3. Connect the CKP sensor electrical connector.
  4.  
  5. Connect the negative battery cable.
  6.  

 
label.common.footer.alt.autozoneLogo