Aveo 2006-2007

Manifold Absolute Pressure Sensor

Print

Removal & Installation



  1. Disconnect the negative battery cable.
  2.  
  3. Remove the Manifold Absolute Pressure (MAP) sensor electrical connector.
  4.  
  5. Disconnect the vacuum hose.
  6.  
  7. Remove the MAP sensor bolt.
  8.  
  9. Remove the MAP sensor.
  10.  

To install:

  1. Install the MAP sensor and tighten the bolt to 89 inch lbs. (10 Nm).
  2.  
  3. Connect the vacuum hose.
  4.  
  5. Connect the MAP sensor electrical connector.
  6.  
  7. Connect the negative battery cable.
  8.  

 
label.common.footer.alt.autozoneLogo