Aveo 2006-2007

Timing Belt Rear Cover

Print

Removal & Installation



  1. Remove the timing belt.
  2.  
  3. Remove the camshaft sprockets.
  4.  
  5. Remove the crankshaft sprocket.
  6.  
  7. Remove the timing belt automatic tensioner.
  8.  
  9. Remove the timing belt idler pulley.

    Click image to see an enlarged view

    Fig. Remove the timing belt idler pulley to access the rear timing belt cover.

  10.  
  11. Remove the rear timing belt cover.

    Click image to see an enlarged view

    Fig. Remove the rear timing belt cover mounting bolts to remove the cover.

  12.  

To install:

  1. Install the rear timing belt cover and tighten the bolts to 89 inch lbs. (10 Nm).
  2.  
  3. Install the timing belt idler pulley and tighten the bolt to 30 ft. lbs. (40 Nm).
  4.  
  5. Install the timing belt automatic tensioner and tighten the bolts to 18 ft. lbs. (25 Nm).

    Click image to see an enlarged view

    Fig. Mounting location of the timing belt automatic tensioner-1.6L engine

  6.  
  7. Install the crankshaft sprocket.
  8.  
  9. Install the camshaft sprockets.
    CAUTION
    Take extreme care to prevent any scratches, nicks or damage to the camshafts.

  10.  
  11. Install the timing belt.
  12.  

 
label.common.footer.alt.autozoneLogo