Aveo 2006-2007

Stabilizer Bar (Sway Bar) & Links

Print

Removal & Installation



  1. Raise and safely support the vehicle allowing the suspension to hang free.
  2.  
  3. Remove the wheels.
  4.  
  5. Remove the stabilizer bar-to-knuckle nut and the bar-to-link nut.
  6.  
  7. Remove the stabilizer bar links.
  8.  
  9. Remove the front crossmember assembly.
  10.  
  11. Remove the stabilizer bar from the crossmember by removing the U-clamp bolts.

    Click image to see an enlarged view

    Fig. Removal and installation of the stabilizer bar

  12.  

To install:

  1. Install or connect the following:

    Stabilizer bar and U-clamps. Tighten the clamp bolts to 18 ft. lbs. (25 Nm).
     
    Install the front crossmember assembly.
     

  2.  
  3. Install the stabilizer bar links.
  4.  
  5. Install the stabilizer bar-to-knuckle nut and the bar-to-link nut and tighten the nuts to 37 ft. lbs. (50 Nm).
  6.  
  7. Install the wheels.
  8.  
  9. Lower the vehicle.
  10.  

 
label.common.footer.alt.autozoneLogo