Aveo 2006-2007

Fuel Pump

Print

Removal & Installation



  1. Relieve the fuel system pressure.
  2.  
  3. Disconnect the negative battery cable.
  4.  
  5. Remove the rear seat.
  6.  
  7. Remove the fuel pump access cover.
  8.  
  9. Disconnect the fuel pump electrical connector.
  10.  
  11. Disconnect the fuel inlet and return lines.
  12.  
  13. Turn the lock ring counterclockwise to clear the tank tabs.
  14.  
  15. Remove the fuel pump.

    Click image to see an enlarged view

    Fig. Fuel pump locking ring-1.6L engine

  16.  

To install:

  1. Clean the gasket mating surface, then install a new gasket.
  2.  
  3. Install the fuel pump in the same location as when removed.
  4.  
  5. Position the locking ring in place, then turn it clockwise to contact the stop.
  6.  
  7. Connect the fuel pump electrical connector.
  8.  
  9. Connect the fuel inlet and return lines.
  10.  
  11. Install the fuel pump access cover.
  12.  
  13. Install the rear seat.
  14.  
  15. Connect the negative battery cable.
  16.  
  17. Start the engine and check for leaks.
  18.  

 
label.common.footer.alt.autozoneLogo