Aveo 2006-2007

Ignition Lock Cylinder

Print

Removal & Installation



  1. Disconnect negative battery cable.
  2.  
  3. Remove the lower steering column cover panel by removing the screws.

    Click image to see an enlarged view

    Fig. To remove the lock cylinder of the switch cylinder housing, press down the detent spring with a 2.5 Allen wrench, or other suitable tool, and pull out the lock cylinder.

  4.  
  5. Remove the ignition lock cylinder as follows:
    1. Turn the key to the ACC position.
    2.  
    3. Using a 2.5mm Allen wrench, press down the detent spring in the ignition lock cylinder.
    4.  
    5. Remove the ignition lock cylinder.
    6.  

  6.  

To install:

  1. Install the ignition lock cylinder and remove the key.
  2.  
  3. Install the lower steering column cover panel.
  4.  
  5. Connect the negative battery cable.
  6.  

 
label.common.footer.alt.autozoneLogo