Aveo 2006-2007

Multi-Function (Combination) Switch

Print

Removal & Installataion



  1. Disconnect the negative battery cable.

    Click image to see an enlarged view

    Fig. Remove the lower steering column cover panel screws and remove the lower steering column cover panel

  2.  
  3. Remove the lower steering column cover panel screws and remove the lower steering column cover panel.
  4.  
  5. Turn the steering wheel to expose the upper steering column cover panel screws. Remove the upper steering column cover panel screws and remove the upper steering column cover panel.

    Click image to see an enlarged view

    Fig. Remove the turn signal switch by pushing in on the tabs on either side of the switch housing

  6.  
  7. Remove the turn signal switch by pushing in on the tabs on either side of the switch housing.
  8.  
  9. Disconnect the electrical connections from the turn signal switch.
  10.  

To install:

  1. Connect the electrical connections to the turn signal switch.
  2.  
  3. Install the turn signal switch by snapping it into the switch housing.
  4.  
  5. Install the lower steering column cover panel using the lower steering column cover panel screws.
  6.  
  7. Tighten the lower steering column cover panel screws to 27 inch lbs. (3 Nm).
  8.  
  9. Install the upper steering column cover panel using the upper steering column cover panel screws.
  10.  
  11. Tighten the upper steering column cover panel screws to 27 inch lbs. (3 Nm).
  12.  
  13. Connect the negative battery cable.
  14.  

 
label.common.footer.alt.autozoneLogo