Aveo 2006-2007

Tie Rod Ends

Print

Outer Tie Rod End



  1. Remove the outer tie rod hex nut and disconnect the outer tie rod from the steering knuckle using a suitable ball joint remover.
  2.  
  3. Loosen the tie rod lock nuts and remove the outer tie rod.

    Click image to see an enlarged view

    Fig. Loosen the tie rod lock nuts to remove the outer tie rod-Aveo steering linkage

  4.  

To install:

  1. Install the outer tie rod and tighten the lock nuts to 40 ft. lbs. (54 Nm).
  2.  
  3. Install the outer tie rod and tighten the hex nuts to 33 ft. lbs. (45 Nm).
  4.  
  5. Check the alignment and adjust as required.
  6.  

 
label.common.footer.alt.autozoneLogo