Aveo 2006-2007

Removal & Installation

Print

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the SIR module.
  4.  
  5. Matchmark the steering wheel to the steering column shaft.
  6.  
  7. Remove the steering wheel nut and the retaining clip.
  8.  
  9. Remove the steering wheel using the KM-210-A or J 1859-A with J 36541-A.
  10.  
  11. Unclip the contact ring from the steering wheel, if necessary.

    Click image to see an enlarged view

    Fig. Removal and installation of the steering wheel

  12.  

To install:

  1. Clip the contact ring on the steering wheel, if necessary.
    NOTE
    In order to install the steering wheel correctly, match-mark the steering column shaft to the steering wheel.

  2.  
  3. Align the match marks on the steering wheel and the steering column shaft. Turn the signal-canceling cam on the wheel to the left.
  4.  
  5. Install the retaining clip and the steering wheel nut.

    Tighten the steering wheel nut to 28 ft. lbs. (38 Nm).
     
    Bend the tabs to secure the retaining clip.
     
    Install the SIR module.
     
    Connect the negative battery cable.
     

  6.  

 
label.common.footer.alt.autozoneLogo