Aveo 2006-2007

Windshield Wiper Systems

Print

Removal & Installation



Wiper Motor
  1. Disconnect the negative battery cable.
  2.  
  3. Put the wiper arms in the upright position.
  4.  
  5. Remove the left side portion of the air inlet grille panel.
  6.  
  7. Remove the nut securing the wiper arm linkage to the motor drive shaft.
  8.  
  9. Pry the wiper arm linkage off of the motor drive shaft.
  10.  
  11. Disconnect the motor electrical connectors.
  12.  
  13. Remove the mounting bolts and remove the wiper motor.
  14.  

To install:

Click image to see an enlarged view

Fig. Front wiper motor mounting-Hatchback shown, sedan similar

  1. Install the wiper motor and tighten the mounting bolts to 88 inch lbs. (10 Nm).
  2.  
  3. Connect the motor-s electrical connectors.
  4.  
  5. Press the wiper arm linkage onto the motor drive shaft.
  6.  
  7. Install the wiper arm linkage to the motor drive shaft and tighten the nut to 88 inch lbs. (10 Nm).
  8.  
  9. Install the left side portion of the air inlet grille panel.
  10.  
  11. Connect the negative battery cable.
  12.  

 
label.common.footer.alt.autozoneLogo